Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A ceiling fan immediately
05-17-2018, 11:56 PM
Post: #1
Big Grin A ceiling fan immediately
So Im sitting in your kitchen in the middle of your day getting ready to watch a football game, I've the oven using the mini hotdogs, getting ready to stay in when it happened...Im sweating!

Thats when I decided to install a ceiling fan. A ceiling fan provides many functional benefits while putting a certain decorative touch to your place. In the summer it can help cool a space (or even a deck). In the winter it may be used at low speeds to circulate warmer air that's increased to ceiling level.

What-ever your reason for adding a ceiling fan, you will find it to be a relatively easy task particularly when you'll be replacing a light fixture in the middle-of a room (all the wiring will already be there). To check up more, please check-out: cheap led can lights. Almost certainly your greatest obstacle is a new workbox that's approved for the weight of an overhead fan or adding support to a preexisting workbox, a workbox that's perhaps not approved for ceiling fan weight can lead to disaster!

The next directions cover general installations when replacing an existing light. It will give a concept to you of what's required for the task. Ensure you review and follow directions which are unique to the lover you buy. According to your installation requirements, you may need to purchase an extended down pole for cathedral ceilings or purchase an optional light equipment if it is maybe not involved.

1) Turn off the signal by switching off the breaker. Eliminate the existing ceiling fixture.

2) Determine if enough support will be provided by your existing workbox. If you have use of the workbox from your own basement, check to see if the workbox has steel cross braces that span between two joists. If not, you are able to cut a 2x4 to fit in between the joists. Deploy it so it touches the top of the workbox. Point the wood in position. From your room, use 1 drywall screws to anchor the-box for the wood brace.

3) If you do not have access from the loft, you can use a metal cross brace through the rough opening in your ceiling and then connect an authorized workbox for the metal brace.

4) I hate this part! Build the ceiling fan in line with the producers provided instructions. If you are willing to hang the lover, take the mounting bracket and install it to the limit workbox. Some fans feature a hanging body that enables one to catch the ball end of the down pole in place. The others feature a bracket that supplies a J lift that allows you to hang the engine housing while starting up the wiring

5) If you removed a light fixture in the ceiling, most likely the existing wiring will provide one moved world to your new ceiling fan. What this means is the wall switch may function as master switch to turn the machine off and on. Get further on our affiliated URL - Hit this link: recessed ceiling led. The pull string around the fan will also get a grip on the fan (and its rate). A pull string and the wall switch may also control it, If you install an optional light kit on the fan.

6) Following wiring diagram supplied with the fan, hook-up the wires using wire nuts. Most likely that is as easy as connecting the 2 black wires; connecting the 2 white wires and connecting the 2 ground wires.

7) After the lover is born, finish its construction based on the particular manufacturers instructions. You will have to deploy the canopy to the top of the rod.

8 )You will even have to fix the fan blades. If you're installing a light kit, remove the cover on the bottom of the fan where the light kit is likely to be installed. Identify further on our partner use with - Click this website: The advantages of Adding a Ceiling Medallion. Following a manufacturers instructions, assemble and install the light set.

At this point you are ready-to start enjoying your ceiling fan and switch the breaker o-n..
Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)